32700 8S9P 25.6V 54Ah Lithium Iron Phosphate Battery for Solar Light

Item No.: TWE0581
Brand: TWE / OEM
Nominal Voltage: 25.6V
Nominal Capacity: 54Ah
Max Dimensions: 110*142*650mm
Certificate: CE, ROHS, UN38.3, IEC62133, etc.
Warranty: 2 years
Description Brand Introduction Review
Description

Product Overview

This is a 25.6V 54Ah rechargeable lithium battery pack assembled from 32700 cells in an eight-series, nine-parallel layout and sealed inside an aluminum alloy column. It stores what the panel collects during daylight and releases it into the lamp after dark, so the whole design follows lighting duty rather than traction or inverter duty.

A white golf cart with brown seats and a golf bag in the rear

The people who buy it build or run outdoor lighting: solar street light manufacturers, billboard and signage lighting suppliers, and integrators working where there is no grid connection. They are buying a lithium battery for a fixture that will be visited rarely, and the questions that decide the purchase are weather sealing and service interval.

Quality management system certificate for lithium ion battery research, development and production

Most installations use it in place of a 24V lead-acid block. Nominal voltage stays in the same class, the pack is far lighter to lift onto a pole, and there is no electrolyte to top up. The controller normally has to be re-set for a lithium charge profile before the first night.

A cleanroom manufacturing line with enclosed automated machinery and a worker in protective clothing

In service the pack sits between the panel, the controller and the lamp: charged while the array is producing, discharged overnight, and watched by a BMS that disconnects the load before the cells are drained flat.

32700 8S9P 25.6V 54Ah Lithium Iron Phosphate Battery for Solar Light

Sealed aluminum column rated IP67 — dust-tight and protected against temporary immersion, so the housing is the weather barrier and no second enclosure is needed. Daily-cycle durability — capacity is rated to hold at 80% of its initial value across a long cycle count, so replacement follows years of nights rather than seasons. Discharge headroom for lighting loads — the continuous and peak ratings are set for lamp start-up and dimming schedules rather than for steady traction duty. Built-in BMS — the protection board sits inside the pack, so the battery looks after its own cells instead of relying on an add-on device. LiFePO4 battery chemistry — lithium iron phosphate cells are chosen for thermal stability and long calendar life, which matters for a pack that lives outdoors all year. Wide operating window — discharging into a cold night and charging from a panel in a hot enclosure both stay inside the rated range. Low self-discharge and high charge efficiency — useful when the pack sits at partial charge through a low-sun season or waits in a warehouse before installation. Easy to handle on site — a pack one person can lift onto a pole, and a much lower load on the bracket than the lead-acid block it replaces.

A residential roof fitted with dark blue solar panels
Solar-powered street lights standing along a roadside
White cab-over motorhome with scenic side graphics, parked outdoors

Production & Quality Control

StageWhat happens
Materials mixingFully automatic feeding system, high precision and fully enclosed
CoatingHigh-precision constant-temperature coating machine
Electrode rollingPrecision automatic roller machine
Electrode slittingAutomatic continuous slitting machine
WindingAutomatic winding machine
Into shellCells placed into the case before filling
Tab welding and beadingAutomatic welding machine
Electrolyte fillingAutomatic bell-type injection machine
Laser weldingAutomatic laser welding
Formation and capacity sortingNeedle-bed type charging cabinet
Cycle testEvery cell tested for three cycles
OQC100% inspection of appearance, voltage, capacity, resistance and size
Black portable PA speaker in front of a live band
Certificate of conformity document for lithium ion batteries
Shenzhen BST Technology Co

Housing, Connector & Build

The pack is built as a sealed aluminum column with capped ends and the cable leaving the top. Aluminum does two jobs here: it carries the structure of the pack and it spreads cell heat into the shell, so there is no plastic case sitting inside a metal box.

Industrial printing or packaging machine with control panel and roller assemblies on a factory

IP67 is the working number — dust-tight, and protected against temporary immersion. In lighting terms that means driven rain, road spray and the occasional flooded pole base. The two places worth a look after installation are the end seals and the cable exit.

32700 8S9P 25.6V 54Ah Lithium Iron Phosphate Battery for Solar Light

The terminal is a connector, and it is the part we build to your drawing. Connector type, cable length and the direction the lead exits the housing are fixed at that stage, which is why a custom lithium battery order usually starts with a mating-connector photo or a simple sketch rather than a part number alone.

32700 8S9P 25.6V 54Ah Lithium Iron Phosphate Battery for Solar Light

The column can stand vertically on a bracket or lie horizontally inside a lamp housing, and the flat capped ends give a face to clamp against. Settle the orientation before the cable exit is fixed, so the lead points where water will not run into it.

32700 8S9P 25.6V 54Ah Lithium Iron Phosphate Battery for Solar Light

Nothing inside is serviceable in the field. Treat the pack as a sealed unit: if a string fails, the pack is replaced rather than opened, and the BMS is not intended to be accessed on site.

Certificate of conformity for a lithium ion battery, issued by Anbotek
Industrial stainless steel processing machine with control panel and hoses in a cleanroom
32700 8S9P 25.6V 54Ah Lithium Iron Phosphate Battery for Solar Light

Charge & Discharge Setup

  1. Program the controller for a rechargeable lithium battery. A controller left on its lead-acid algorithm will not use the pack's full capacity and may hold a float voltage the BMS reads as a fault.
  2. Set the charge cut-off to 29.2V so the controller ends the charge before the BMS has to step in.
  3. Run daily charging at the 10A standard figure. Move toward the 20A maximum only when the array is oversized and the sun hours are short.
  4. Set the load disconnect near the 20V discharge cut-off, so the lamp stops during a run of cloudy days before the pack is drained flat.
  5. Keep the lamp inside 20A continuous. Peaks up to 30A are allowed for 5 seconds, which covers ignition, but a sustained draw above the continuous rating will trip protection.
  6. Let the BMS own the protections and use the controller to stay inside those limits rather than duplicating them in the settings.
Close-up of industrial rollers and gauges on manufacturing equipment
Worker standing beside a stainless steel production line in a cleanroom
A cleanroom factory interior with workers in blue uniforms operating machinery and a computer

Solar Lighting Applications

  • Solar street lighting — pole-mounted or fitted inside the lamp head, where the pack has to keep working through driven rain, dust and summer heat.
  • Billboard and signage lighting — a fixed night-time load with no grid behind it, where low self-discharge and cycle life carry more weight than headline current.
  • Emergency and standby lighting — where a mains failure must still leave lamps on, and the BMS stops a long outage from flattening the pack.
  • Small off-grid solar energy storage — panel, controller and DC load systems that need a battery block matched to a known daily consumption.
  • Telecom and monitoring cabinets — remote sites where a service visit costs more than the battery, so the interval between replacements is the deciding number.
  • Access control, security devices and solar-powered street furniture — steady low-current draws that sit well inside the continuous rating, with the sealed housing suited to an outdoor cabinet.
32700 8S9P 25.6V 54Ah Lithium Iron Phosphate Battery for Solar Light
32700 8S9P 25.6V 54Ah Lithium Iron Phosphate Battery for Solar Light
32700 8S9P 25.6V 54Ah Lithium Iron Phosphate Battery for Solar Light

Specifications

ItemSpecification
Nominal Voltage25.6V
Nominal Capacity54Ah, standard discharge @0.2C after standard charge
Dimensions & Weight110 x 142 x 650 mm, approx. 11 kg
Cycle Life≥2000 times, ≥80% of the initial capacity
Housing & IP RatingAluminum alloy, IP67
Terminal TypeConnector / customized
Cut-off VoltageCharge 29.2V, discharge 20V
Charge Current10A standard, 20A maximum
Discharge Current10A standard, 20A maximum continuous, 30A peak ≤5s
Operating TemperatureCharge 0 °C to 45 °C, discharge -20 °C to 60 °C
Storage Temperature-20 °C to 25 °C for 12 months, -20 °C to 35 °C for 3 months, -20 °C to 45 °C for 1 month
ProtectionOver charge, over discharge, over current, over voltage, short circuit, cell protection, temperature protection
32700 8S9P 25.6V 54Ah Lithium Iron Phosphate Battery for Solar Light
32700 8S9P 25.6V 54Ah Lithium Iron Phosphate Battery for Solar Light
CB Test Certificate for a lithium-ion polymer battery

Ordering & Delivery

  1. Send the fixture details first — lamp wattage, required night hours, panel size and controller model. That is enough for us to say whether 54Ah is the right size or whether another capacity in the LiFePO4 battery family fits the same job.
  2. Confirm the interface. The terminal is a connector or a customized part, so send the mating connector and the lead length you need before the pack is built.
  3. Tell us the destination market. This model is listed with CE, RoHS, UN38.3 and IEC62133 certificates, and the document set can be prepared with the order.
  4. Shipping documents are prepared for every lithium battery shipment: UN38.3, MSDS and Air/Sea Transport Identification & Classification. We ship by sea, air or express from Shenzhen, Shanghai or Hong Kong, and confirm the paperwork your forwarder needs for the destination.
  5. Warranty: 2 years on this pack. Our 51.2V stacked LiFePO4 solar energy storage system line carries a 5-year warranty.
  6. Lead time, packing and price are confirmed per order once capacity, connector and documents are fixed. Packing follows dangerous-goods practice, with the terminals protected and the cable restrained.
  7. If the fixture is new, ask your sales contact about sample availability and pilot-run timing before committing to production, and send the original order reference on repeat builds so the same terminal drawing and documents are used.
32700 8S9P 25.6V 54Ah Lithium Iron Phosphate Battery for Solar Light
32700 8S9P 25.6V 54Ah Lithium Iron Phosphate Battery for Solar Light
32700 8S9P 25.6V 54Ah Lithium Iron Phosphate Battery for Solar Light
32700 8S9P 25.6V 54Ah Lithium Iron Phosphate Battery for Solar Light
32700 8S9P 25.6V 54Ah Lithium Iron Phosphate Battery for Solar Light
32700 8S9P 25.6V 54Ah Lithium Iron Phosphate Battery for Solar Light

Scale & Supply Capability

Topwell Power is a lithium battery manufacturer, not a trading house. Our range runs from compact packs to large storage systems, so buyers can consolidate several lines behind one specification standard and one set of shipping documents. OEM and private-label work is routine: your label, case marking, terminal choice, capacity and packing configuration. Capacities and enclosures are customised per project, samples are available before a production run, and shipments go out with the transport documentation freight forwarders ask for. Send your target specification and volume, and we will confirm lead time, packing and pricing for that order.

32700 8S9P 25.6V 54Ah Lithium Iron Phosphate Battery for Solar Light
32700 8S9P 25.6V 54Ah Lithium Iron Phosphate Battery for Solar Light
32700 8S9P 25.6V 54Ah Lithium Iron Phosphate Battery for Solar Light
32700 8S9P 25.6V 54Ah Lithium Iron Phosphate Battery for Solar Light
KADO-branded control panel and production machinery in a factory setting

FAQ

Will it fit where our lead-acid block sits now?

Usually, but the shape is different. This pack is a long aluminum column rather than a squat block, so it often goes onto a pole bracket or inside the lamp housing instead of into the old battery box. Check the space against the dimensions above and settle the bracket before ordering — the column can stand upright or lie flat, and the cable exit should point away from standing water.

How is this different from a general-purpose 24V LiFePO4 battery?

A general-purpose pack is usually designed for traction or inverter duty, where very high current matters. This one is built for a fixed lighting load: a sealed aluminum housing rated IP67, discharge sizing matched to a lamp plus its start-up peak, and a cell layout chosen for daily partial cycles. If your load draws hundreds of amps, a different pack in our range is the better fit.

What do you need from us to get the connector right?

A photo or drawing of the mating connector, the cable length you want, and which way the lead should exit the housing. The terminal is a connector or a customized part, and those three details are what turn this into a custom lithium battery for your fixture rather than a standard unit.

What happens to the lamp after several days without sun?

The BMS disconnects the load before the cells are drained flat, so the lamp goes dark instead of the pack being damaged. A rechargeable lithium battery that was cut off early recovers on the next sunny day; one left flat for weeks may not. Size the array and the night duty cycle so long cloudy spells stay the exception rather than the routine.

Is a 25.6V pack the same as a 24V battery?

Yes. Eight lithium iron phosphate cells in series give 25.6V nominal, and that is what is sold as a 24V lithium battery — the same class as the lead-acid block it replaces, with a different charge profile. Look for a controller with a 24V lithium setting; a lead-acid setting will not charge it properly.

Can we order a different capacity for a longer night runtime?

This 54Ah pack is one capacity in a 24V LiFePO4 range that runs from compact packs to larger storage units. Send the lamp wattage, the hours of light you need and the space available, and we will point to the version that fits — or confirm that 54Ah is already the right one.

Brand Introduction

Yichun Topwell Power Co., Ltd (Trademark:TWE) established in 2002, is a high-tech enterprise focusing on the R&D, production and sales of lithium polymer batteries, lithium ion batteries, lithium iron phosphate batteries, and lithium thionyl chloride batteries. Products are widely used in consumer electronics, Internet of Things, smart home, medical, vehicle, home and outdoor energy storage, and have obtained CE, RoHS, Reach, UN38.3, IEC62133, CB, UL, MSDS certifications, etc.

 

Topwell moves on by providing reliable, efficient and intelligent battery solutions to meet different energy needs. We have efficient engineering, production and quality management teams. From raw material procurement, to production, testing, sales and after-sales service, all steps have been controlled by a strict quality management system. Our factory has passed ISO9001, IS014001, BISI certification, SGS, Intertek audit. With the advantages in price, quality and service, we have established long-term and stable cooperative relationships with many well-known brands. Topwell always attached the great importance to the long term cooperation with customers. No matter the order is big or small, we do our best to support you the highest quality with favorable price. We believe that Topwell Power can be your best battery supplier!

Review
Review

ver_code
1/3
X
Send your message to us
ver_code