This is a frog-style rechargeable lithium battery that mounts on the seat tube inside the frame triangle, where it stays clear of your legs and keeps weight low and central. The case is shaped like a small bottle with a flat inner face, so it sits closely against the tube instead of hanging out into the pedalling space. A moulded handle lets you lift the pack off in one hand when you take it indoors to charge or carry the bike up a flight of steps. The case is built in 24V, 36V and 48V 13Ah versions, so a rider moving from a 24V commuter build to a 36V or 48V drive can keep the same seat-tube cradle and the same style of pack. The detailed specification covers the 24V build; whichever version you order has to match the rated voltage of your motor and controller. We supply it to bike builders, conversion-kit fitters and repair shops that need a replacement in a known form factor rather than a new frame design. It is equally a straightforward upgrade for anyone whose original seat tube battery has lost capacity — the mount and the connector are the parts that decide fit, and both can be checked before the order is placed. Day to day, the pack charges through its DC port whether it is on the bike or on the bench, and the key lock keeps it attached to the cradle over rough ground. Drive-side profile — the photographs show the frog-style e-bike battery from the side: a matte black moulded case with a curved outer face, a flat inner face, a red front accent and the rating label bonded to the side. Moulded carry handle — the handle is formed into the case rather than added as a strap, so the pack can be carried one-handed without putting load on the connector or the lock. Key-operated lock — a keyed latch locks the pack to its bracket and the keys stay with the rider, so the pack cannot be lifted off the bike in a car park or a bike shed. Side mounting bracket — a metal bracket carries the pack against the seat tube and the case slides onto it; the lock holds the pack in position while the bracket takes the weight. Discharge lead — the pack leaves the case as a cable with a connector, so the controller side stays a plug rather than an exposed terminal when the pack is removed. DC charging port — charging uses its own DC inlet on the case, separate from the discharge lead, so the pack can be topped up while it is still wired into the bike. Dimension drawing — the case outline and mounting points are drawn on the gallery images with the key dimensions marked, so a frame builder can check clearance before ordering.






High energy density and conversion efficiency. The high-performance lithium battery cells inside store a lot of energy for their size, which is why a case this compact can carry a useful capacity without becoming a block you have to steer around the frame. More of the stored energy also reaches the motor instead of being lost as heat, so the pack runs cooler on a long climb.
Long service life in real use. The custom lithium battery pack is built for repeated daily charging, and the protections inside it stop the deep discharges and over-charges that shorten a battery's working life. Riders who recharge at the end of each ride rather than waiting for the pack to die get the longest service out of it.
Low self-discharge. A rechargeable lithium battery pack that sits for a week or two between rides still holds most of its charge, so a weekend bike does not need topping up every few days. That matters most in winter, when a bike may go a month between outings and a flat pack is the usual reason for a no-start.
Easy installation. The frog-style e-bike battery slides onto its seat-tube bracket, the connector mates and the key locks it — no drilling and no frame changes. If the cradle pattern on your frame already matches, the swap takes a few minutes; if it does not, the bracket and the connector are the two parts to sort out with us before the order.
Excellent high-temperature performance. Output stays steady when the case heats up on a long summer climb or after a fast charge in a warm workshop, and the pack keeps delivering through a wide band of riding temperatures without cutting out early.
Advanced BMS. The board inside manages over-charge, over-discharge, over-current and over-temperature protection, and it balances the cell groups so they stay at a similar state of charge. Balancing is what stops one group drifting and dragging the whole pack's capacity down as it ages.


| Application | How the pack is used |
| Electric mountain bike | Sits inside the frame triangle, where the rechargeable lithium battery stays protected in a fall and the weight stays low for technical climbing and descending. |
| Commuter and hybrid e-bike | The frog-style e-bike battery comes off in seconds for charging at a desk or in a flat, and the lock keeps it on the bike in a shared park or on a station rack. |
| Wheelchair and mobility conversions | The low, central mounting suits chairs where a rear-rack pack would make the vehicle harder to steer and heavier at the back. |
| Electric ATV and light utility vehicles | A compact pack for small utility vehicles that need repeated short runs rather than a large storage bank. |
| Farm and garden machinery | Fitted to equipment converted for battery power — lighting, small drives and instrumentation — where the sealed case has to cope with dust and damp. |
| Rental and workshop fleets | The key lock and slide-on bracket let a workshop pull packs for charging in rotation without dismantling the bike. |




| Item | Specification |
|---|---|
| Model No. | XQW-24V13Ah |
| Nominal voltage | 24V |
| Nominal capacity | 13Ah (customized) |
| Dimensions | 314 × 157 × 75 mm |
| Weight | 4 kg |
| Cycle life | ≥1000 cycles at 80% DOD |
| Charge voltage | 29.4V |
| Discharge cut-off voltage | 19.6V |
| Max charge current | 5A |
| Max continuous discharge current | 20A |
| Operating temperature | Charge: 0 °C ~ 45 °C; discharge: -20 °C ~ 60 °C |
| Storage temperature | -10 °C ~ 40 °C |
| IP class | IP65 |
| Case material | ABS |






Topwell Power is a lithium battery manufacturer, not a trading house. Our range runs from compact packs to large storage systems, so buyers can consolidate several lines behind one specification standard and one set of shipping documents. OEM and private-label work is routine: your label, case marking, terminal choice, capacity and packing configuration. For a custom lithium battery, capacities and enclosures are set per project, samples are available before a production run, and shipments go out with the transport documentation freight forwarders ask for. Send your target specification and volume, and we will confirm lead time, packing and pricing for that order.
Cell intake — every pack starts with brand-new A-grade cells, domestic or imported. A stable material composition inside each cell is the first line of safety for the whole pack, and consistent cells from lot to lot are what keep a lithium battery's capacity predictable. Capacity, voltage and internal resistance matching — cells are measured and grouped on all three values before assembly. A pack is only as strong as its weakest group, so matching stops one cell working harder than its neighbours and ageing faster. Mechanical assembly — the cells sit in fixed brackets that hold their spacing under vibration. That is what keeps a seat tube battery stable on rough ground, where a loose cell block would chafe against the case and fail early. Nickel strip welding — the connections are spot-welded with formed pure nickel strip. Nickel has lower resistance than plated steel, does not rust at the weld, and carries the current without building heat. Safety valve on every cell — each cell carries an explosion-proof vent that releases pressure if the cell is abused, rather than letting the case split. Final check and documentation — assembled packs are checked before packing, and this model is listed with CE and RoHS conformity. Ask us for the current certificate pack and for the transport documents your carrier needs for your destination.




Yichun Topwell Power Co., Ltd (Trademark:TWE) established in 2002, is a high-tech enterprise focusing on the R&D, production and sales of lithium polymer batteries, lithium ion batteries, lithium iron phosphate batteries, and lithium thionyl chloride batteries. Products are widely used in consumer electronics, Internet of Things, smart home, medical, vehicle, home and outdoor energy storage, and have obtained CE, RoHS, Reach, UN38.3, IEC62133, CB, UL, MSDS certifications, etc.
Topwell moves on by providing reliable, efficient and intelligent battery solutions to meet different energy needs. We have efficient engineering, production and quality management teams. From raw material procurement, to production, testing, sales and after-sales service, all steps have been controlled by a strict quality management system. Our factory has passed ISO9001, IS014001, BISI certification, SGS, Intertek audit. With the advantages in price, quality and service, we have established long-term and stable cooperative relationships with many well-known brands. Topwell always attached the great importance to the long term cooperation with customers. No matter the order is big or small, we do our best to support you the highest quality with favorable price. We believe that Topwell Power can be your best battery supplier!