Product Overview
This is a 25.6V 10Ah LiFePO4 battery — the 24V nominal class — built for travel scooters, folding e-scooters and the small mobility vehicles that get charged in a hallway or loaded into a car boot. It is a slim, sealed rectangular pack with a connector on flying leads, the shape most scooter decks and under-seat compartments are already designed around, and it uses LFP (lithium iron phosphate) chemistry. It suits scooter makers fitting a lithium pack into a new model, dealers keeping replacement stock, and service shops converting tired lead-acid scooters. Because the block is compact and light, one 24V scooter battery covers several frame designs, which keeps a parts shelf and a service counter simple. In most 24V scooters the pack takes the place of a sealed lead-acid battery of the same nominal voltage. Day to day there is nothing to top up and nothing to water. The pack is charged after a ride, unplugged when full and left in the scooter; a lithium battery of this size asks for no maintenance between charges — no terminal brushes, no distilled water, no conditioning routine.
Battery Management & Protection
- Over-charge and over-discharge cut-offs: the board stops current at the pack's upper and lower voltage limits, so a charger left connected overnight or a scooter run until it stops will not take the cells past their safe range.
- Over-current and short-circuit protection: a stalled motor against a kerb, a pinched lead or a crossed plug trips the board instead of damaging the cells.
- Over-voltage and cell protection: the pack is monitored at cell level as well as pack level, which is what keeps a small LiFePO4 scooter pack healthy across hundreds of charge and discharge cycles.
- Temperature protection: charging or discharging is cut if the pack runs outside its safe window, which matters for scooters kept in vans, sheds and unheated garages.
- Sealed and tamper-evident: the board sits inside the shrink-wrapped housing with no user-serviceable parts, so a suspect pack is replaced rather than opened.
- It is a guard, not a charger: the BMS protects the cells in this rechargeable lithium battery, but the pack still needs a charger with a proper lithium profile — the two are designed to work together.
Performance Advantages
The lithium battery is rated for at least 2,000 cycles down to 80% of its initial capacity. For a scooter charged most days, that is years of service from one 24V scooter battery instead of a lead-acid block swapped out every season, and the capacity left after those cycles is still useful for short local trips.
Weight is where the difference shows in the hand. A sealed lead-acid block of the same nominal rating needs two hands and a strap; this pack lifts out with one, which makes bench testing, moving a pack between scooters and packing for shipment far less of a job.
A rechargeable lithium battery left idle holds its charge far better than lead-acid, so a scooter that only comes out at weekends does not need a maintenance charge the night before. The pack is ready when the scooter is.
Voltage holds steady through most of the discharge instead of sagging as the pack empties, so the scooter keeps its speed on the way home rather than fading over the last mile.
The LiFePO4 scooter pack uses the more thermally stable lithium chemistry, which is why packs of this size are chosen for scooters kept indoors. Cold morning starts and hot afternoons in a parked van both sit inside the pack's operating window, and there is nothing inside that needs venting or topping up.
Fitting, Charging & Care
- Check the scooter's system voltage. A 25.6V pack belongs in a 24V system; confirm the controller and motor are rated for it, and ask us if the controller's low-voltage cut-off was set for lead-acid.
- Measure the compartment and plan the lead route. Compare the space with the dimensions in the specification table, leave room for the connector, and check the pack can be strapped or bracketed so it cannot move in the bay.
- Match the plug and polarity. Red is positive and black is negative; if the scooter's existing connector is unusual, send a photo and pin-out before ordering.
- Use a lithium-profile charger. An old lead-acid charger is only suitable if it can be set for LiFePO4; otherwise fit a 24V lithium charger matched to this pack.
- Charge fully, then take a short test ride. Check the 24V scooter battery stays cool, the connector stays seated and the scooter pulls cleanly from a standstill before the pack goes into regular service.
- Charge after use rather than running the pack flat. Partial top-ups do no harm to a LiFePO4 battery; leaving a pack empty for weeks does.
- Keep the contacts clean and dry. A glance at the connector pins at each charge — no corrosion, no loose lead — prevents most intermittent faults that look like a failing pack.
Applications
- Travel scooters and mobility scooters: the everyday job this pack is sized for — a compact block that fits an under-seat or rear compartment and can be lifted out for charging indoors.
- Folding e-scooters and last-mile commuters: a 24V LiFePO4 battery for short urban trips where a light pack matters more than a long range.
- Scooter service and conversion work: replacing a failed lead-acid block with a lighter LiFePO4 scooter pack, then setting the charger to suit the new chemistry.
- Dealers and distributors: one stock line that covers several scooter models, with connector options to match what customers bring in.
- Light 24V electric vehicles: small carts, ride-on equipment and low-speed four-wheelers where a 10Ah pack provides the run time the job needs.
- Solar lighting, backup and small industrial devices where a compact 24V pack fits the enclosure and the current draw stays inside the pack's continuous rating.
Electrical Specifications
| Parameter | Rating |
|---|
| Nominal voltage | 25.6 V |
| Nominal capacity | 10 Ah, standard discharge at 0.2C after standard charge |
| Chemistry | LiFePO4 (lithium iron phosphate) |
| Charge cut-off voltage | 29.2 V |
| Discharge cut-off voltage | 18.4 V (20 V recommended) |
| Standard charge current | 2 A |
| Max charge current | 10 A |
| Standard discharge current | 2 A |
| Continuous discharge current | 10 A |
| Peak discharge current | 20 A for up to 5 s |
| Internal resistance | ≤40 mΩ |
Physical & Environmental Data
| Item | Value |
|---|
| Model | TWE-LF24V10AH |
| Dimensions | 120 × 90 × 70 mm (L × W × H) |
| Weight | Approx. 1.3 kg |
| Housing material | Epoxy board + PVC |
| Terminal type | Connector |
| Operating temperature | Charge 0 °C to 45 °C; discharge −20 °C to 60 °C |
| Storage temperature | −20 °C to 25 °C for 12 months; −20 °C to 35 °C for 3 months; −20 °C to 45 °C for 1 month |
Order Process & Quality Control
- Tell us the specification: voltage, capacity, connector type, lead length, and any label or case marking you need. If the scooter is your own design, this is also where a custom lithium battery requirement — a different connector, a shorter lead, a private label — gets written down.
- Cell production: mixing, coating, electrode rolling and slitting, winding, electrolyte filling and laser welding all run in-house on automated lines.
- Formation and capacity sorting: every cell is formed and then sorted, so cells of similar capacity, voltage and internal resistance are grouped into the same pack.
- Cycle test: all cells are charged and discharged for three cycles before they are released to pack assembly.
- Outgoing inspection: appearance, voltage, capacity, resistance and dimensions are checked on every pack before it is packed.
- Documentation: CE and RoHS certificates are referenced for this model; if your market needs IEC62133, CB, UL or PSE paperwork, say so at enquiry stage and we will confirm what applies to the exact configuration.
- Packing and shipping: packs are packed for dangerous-goods transport and can ship from Shenzhen, Shanghai or Hong Kong; tell us the destination and we will confirm the transport documents your forwarder needs.
- Terms: this model carries a one-year warranty; confirm current pricing, volume terms and lead time with your sales contact before the order is placed.
Scale & Supply Capability
Topwell Power is a rechargeable lithium battery manufacturer, not a trading house. Our range runs from compact packs to large storage systems, so buyers can consolidate several lines behind one specification standard and one set of shipping documents. OEM and private-label work is routine: your label, case marking, terminal choice, capacity and packing configuration. Capacities and enclosures are customised per project, samples are available before a production run, and shipments go out with the transport documentation freight forwarders ask for. Send your target specification and volume, and we will confirm lead time, packing and pricing for that order.
FAQ
Can this pack replace the lead-acid battery in a 24V travel scooter?
In most cases yes, provided the scooter's charger is a lithium-profile unit and the connector and compartment match. The pack's nominal voltage sits where the old 24V block sat, and the lithium battery is lighter, so the tray and straps need checking rather than rebuilding. If the existing charger is a fixed lead-acid type, plan to replace it at the same time.
How much range will 10Ah give my scooter?
Range depends on the motor's average draw, the rider's weight, hills and ambient temperature, so we do not quote a single figure. A 10Ah pack suits scooters with modest, steady current draw; send us the motor rating and your typical trip length and we will check whether this capacity is the right size or whether a larger 24V pack in the range fits better.
Can you match the connector to my scooter's existing plug?
Yes — the pack is supplied with a connector terminal, and the plug can be matched to what the scooter uses. Send a photo of the mating connector with the pin-out and wire colours, and we will confirm the match before the order. On a production run this is usually part of the custom lithium battery specification rather than a one-off change.
What cells are inside the pack, and are they matched?
Cells are formed and then sorted by capacity, voltage and internal resistance before assembly, so the cells in one pack behave alike through charge and discharge. If your project needs a named cell brand or a particular cell format, tell us at enquiry stage and we will confirm what can be built for that requirement.
Do you build this pack in other capacities or voltages?
We build 24V LiFePO4 packs in other capacities, and the case, terminal and lead length can be adapted to a frame. If you are designing a scooter around a different voltage or a larger battery bay, send the target specification and we will come back with what fits.
What should I do with the pack if the scooter is stored for months?
Charge it part-way rather than leaving it flat, disconnect the leads, and keep it somewhere dry and cool. A rechargeable lithium battery loses charge slowly, but a pack left empty for a season is harder on the cells than one stored with some charge in it. Recharge it before the scooter goes back into service.