18650 rechargeable lithium lifepo4 battery 3.2V 1500mAh for miner's lamp

Item No.: TWE0139
Brand: TWE
Nominal Voltage: 3.2V
Nominal Capacity: 1500mAh
Max Dimensions: 18.5*69.5mm
Certificate: CE, ROHS, UN38.3, IEC62133, etc
Warranty: 1 year
Description Brand Introduction Review
Description

Product Overview

It is built on lithium iron phosphate battery chemistry, the thermally steady branch of the lithium family, which is a large part of why it earns its place as a miner's lamp battery in lamps worn on a helmet. Lamp and lighting manufacturers buy it in volume for cap lamps, head torches and emergency units, where a rechargeable lithium battery has to survive a charge cycle every working day for years rather than chase the highest possible energy density. Daily duty is gentle on the cell. That profile suits a solar battery installation that charges through the day and lights up at night, where the cell rarely sees either extreme of its range. One can size does not have to be the whole story. The same production lines also run our lithium ion battery, lithium polymer and lithium thionyl chloride ranges, so a lamp platform that shifts its voltage or capacity later can stay with one supplier and one document set.

Rooftop solar panel array installed on a residential houseSolar street lights mounted along a roadA black solar outdoor stake light with an angled solar panel and round lampA white golf cart with a canopy roof and brown seats on a golfA black electric kick scooter with red accents standing on pavement
18650 rechargeable lithium lifepo4 battery 3.2V 1500mAh for miner's lamp
18650 rechargeable lithium lifepo4 battery 3.2V 1500mAh for miner's lamp
18650 rechargeable lithium lifepo4 battery 3.2V 1500mAh for miner's lamp

Production and Quality Control

  1. Materials mixing. An automatic feeding system keeps the mix enclosed and repeatable, which is where the consistency of a LiFePO4 battery actually starts.
  2. Coating. A constant-temperature coating machine lays the electrode down at a steady thickness.
  3. Electrode rolling and slitting. A precision roller sets the density, then a continuous slitting machine cuts the electrode to width.
  4. Winding and tab welding. The jelly roll is wound automatically, tabs are welded, and the assembly is beaded.
  5. Into shell and injection. The roll goes into the 18650 can and electrolyte is added on a bell-type injection line.
  6. Laser welding. The cap is sealed by automatic laser welding.
  7. Formation and capacity sorting. Each 18650 LiFePO4 cell is formed on needle-bed charging cabinets and then sorted by capacity, so what ships as one batch behaves like one batch.
  8. Cycle test and OQC. Every cell runs three full cycles, then 100% inspection covers appearance, voltage, capacity, resistance and dimensions before packing — and the readings stay with the batch, so a custom lithium battery shipment can be traced back to its numbers.
18650 rechargeable lithium lifepo4 battery 3.2V 1500mAh for miner's lamp
18650 rechargeable lithium lifepo4 battery 3.2V 1500mAh for miner's lamp
18650 rechargeable lithium lifepo4 battery 3.2V 1500mAh for miner's lamp

Certificates and Compliance

DocumentCovers
CEEuropean safety marking for the 18650 LiFePO4 cell
CBSafety test report recognised across IECEE member countries
IEC62133International safety standard for portable sealed secondary lithium cells
ULNorth American safety certification
PSESafety certification for the Japanese market
RoHSRestriction of hazardous substances in electrical and electronic equipment
REACHEuropean regulation on chemical registration, evaluation and restriction
ISO9001Quality management system
ISO14001Environmental management system
BSCISocial compliance audit of the manufacturing site
UN38.3Transport testing required before lithium cells can be shipped
MSDSMaterial safety data sheet
Air/Sea Transport Identification & Classification ReportFreight classification paperwork for air and sea shipments
SGS and Intertek auditsThird-party factory audit reports
18650 rechargeable lithium lifepo4 battery 3.2V 1500mAh for miner's lamp
18650 rechargeable lithium lifepo4 battery 3.2V 1500mAh for miner's lamp
18650 rechargeable lithium lifepo4 battery 3.2V 1500mAh for miner's lamp

Charging and Discharge Limits

  • Charge method: CC/CV, through a charger designed for a LiFePO4 battery. A constant-voltage supply or a lead-acid charger will not stop at the right point and can push the cell past its window.
  • Charge cut-off 3.65V. Set the charger's constant-voltage stage at this figure; the value belongs to this chemistry and is not shared with other lithium types.
  • Discharge cut-off 2.5V. Put the device's low-voltage protection above it so the lamp dims and shuts down cleanly instead of draining the can flat.
  • Standard charge 0.2C. Capacity is measured at this rate, so use it whenever you need a repeatable figure rather than the fastest possible fill.
  • Standard discharge 0.2C. Runtime quoted to your own customers is stated at this rate, with the real load checked against the continuous rating.
  • Max continuous charge 1C and continuous discharge 1C. This is the steady-state ceiling — a lamp on full beam or a tool under normal load sits here.
  • Peak discharge 3C. Short bursts only: start-up inrush, a trigger pull, a cold filament. It is not a continuous rating and should not be designed as one.
  • When the 3.2V 1500mAh cell is specified inside a lithium battery pack, hand these figures to whoever sets the BMS so protection trips at the cell's limits rather than at the pack's nominal voltage.
18650 rechargeable lithium lifepo4 battery 3.2V 1500mAh for miner's lamp
18650 rechargeable lithium lifepo4 battery 3.2V 1500mAh for miner's lamp
18650 rechargeable lithium lifepo4 battery 3.2V 1500mAh for miner's lamp

Temperature and Storage

Charging is specified between 0℃ and 45℃, discharging between -20℃ and 60℃. The gap between those windows matters underground: a miner's lamp battery that has spent a shift in a cold drift can be discharged there, but it should be back above freezing before it goes on the charger, because charging below 0℃ is outside the cell's window.

18650 rechargeable lithium lifepo4 battery 3.2V 1500mAh for miner's lamp

Storage runs on a staircase rather than a single number. Between -20℃ and 25℃ the 3.2V 1500mAh cell holds its specification for 12 months, at -20℃ to 35℃ that falls to 3 months, and at -20℃ to 45℃ to 1 month. A warehouse that reaches 45℃ in summer is effectively a one-month shelf, so either control the temperature or shorten the rotation.

18650 rechargeable lithium lifepo4 battery 3.2V 1500mAh for miner's lamp

For anything longer than a few weeks, keep cells dry and ventilated and out of direct sun. Storing at partial charge rather than full is the usual practice for a LiFePO4 battery, and it is worth logging the date each batch arrives so the oldest stock moves out first.

18650 rechargeable lithium lifepo4 battery 3.2V 1500mAh for miner's lamp

Outdoor housings are the hardest case, because the cell sees a daily swing between a cold night and a sun-heated enclosure. Leave air around the cell, keep the housing out of direct afternoon sun, and treat the storage figures above as what a badly placed installation will cost in calendar life. Solar battery designs that live on a pole or a lawn stake deserve that check before the housing is tooled.

18650 rechargeable lithium lifepo4 battery 3.2V 1500mAh for miner's lamp
18650 rechargeable lithium lifepo4 battery 3.2V 1500mAh for miner's lamp
18650 rechargeable lithium lifepo4 battery 3.2V 1500mAh for miner's lamp

Typical Applications

  • Miner's lamps and cap lamps. Head torches, hand lamps and work lights, where the miner's lamp battery has to be light enough to wear all shift and simple enough to swap at service intervals. Emergency lighting and exit units. Solar street lights and lawn lamps, where the cell behind a small panel is charged and discharged every day; a solar battery in this duty lives or dies on cycle count. Power tools, garden tools and small appliances. Multi-cell assemblies, from single-cell holders up to series strings inside a lithium battery pack for e-bikes, scooters, golf carts, RVs, UPS units and telecom backup, where matched internal resistance keeps the string balanced.
18650 rechargeable lithium lifepo4 battery 3.2V 1500mAh for miner's lamp
18650 rechargeable lithium lifepo4 battery 3.2V 1500mAh for miner's lamp
18650 rechargeable lithium lifepo4 battery 3.2V 1500mAh for miner's lamp

Cell Specifications

ParameterValue
Item No.TWE0139
Model No.LF18650-1500-1S1P
BrandTWE
Nominal Voltage3.2V
Nominal Capacity1500mAh @ 0.2C discharge
ChemistryLithium iron phosphate battery (LiFePO4)
Dimensions18.5 × 69.5 mm max (diameter × height)
Cycle Life≥2000 cycles, ≥80% of nominal capacity
Charge MethodCC/CV lithium battery special charger
Internal Resistance≤50 mΩ
WeightApprox. 40 g
18650 rechargeable lithium lifepo4 battery 3.2V 1500mAh for miner's lamp
18650 rechargeable lithium lifepo4 battery 3.2V 1500mAh for miner's lamp
18650 rechargeable lithium lifepo4 battery 3.2V 1500mAh for miner's lamp

Ordering and Confirmation

  1. Send the application first — the device, the cavity the cell drops into, the current it draws and how it is charged. If the design currently runs a 3.7V lithium ion battery, say so, because the charger and cut-off will be part of the change.
  2. Confirm the termination. Lamp assemblies are built with red and black leads and a small connector, so give us the lead length, connector type, polarity and the current the lead has to carry, and prove the arrangement on a sample before production.
  3. Describe the pack if there is one. For a lithium battery pack, send the series and parallel arrangement, the BMS limits and the enclosure, and the cell count and protection thresholds will be checked against these ratings.
  4. Tell us how it ships. Air and sea transport of a lithium battery runs on UN38.3 and MSDS documentation, and we ship from Shenzhen, Shanghai and Hong Kong with the DG papers your forwarder will ask for.
  5. Ask about samples. If you need cells for bench validation first, raise it with your sales contact and say what you are testing — capacity, connector fit or low-temperature runtime. A custom lithium battery to your own termination is normally proven at that stage.
  6. Confirm the commercial terms for the order. Quantity, packing configuration, lead time and payment terms are quoted per project; a one-year warranty is listed for this cell, so ask for the terms that apply to your order.
  7. Keep the batch data. Voltage, capacity and resistance readings travel with each batch, which is what lets you check a repeat order of the same rechargeable lithium battery against the first delivery.
18650 rechargeable lithium lifepo4 battery 3.2V 1500mAh for miner's lamp
18650 rechargeable lithium lifepo4 battery 3.2V 1500mAh for miner's lamp
18650 rechargeable lithium lifepo4 battery 3.2V 1500mAh for miner's lamp

Scale & Supply Capability

Topwell Power is a lithium battery manufacturer, not a trading house. Our range covers everything from a 3.2V 1500mAh cell like this one up to large storage systems, so buyers can consolidate several lines behind one specification standard and one set of shipping documents. OEM and private-label work is routine: your label, case marking, terminal choice, capacity and packing configuration. Capacities and enclosures are customised per project, samples are available before a production run, and shipments go out with the transport documentation freight forwarders ask for. Send your target specification and volume, and we will confirm lead time, packing and pricing for that order.

18650 rechargeable lithium lifepo4 battery 3.2V 1500mAh for miner's lamp
18650 rechargeable lithium lifepo4 battery 3.2V 1500mAh for miner's lamp
18650 rechargeable lithium lifepo4 battery 3.2V 1500mAh for miner's lamp
18650 rechargeable lithium lifepo4 battery 3.2V 1500mAh for miner's lamp
18650 rechargeable lithium lifepo4 battery 3.2V 1500mAh for miner's lamp

FAQ

Can this cell replace the 3.7V cell in a lamp I already build?

Only when the charger and the low-voltage cut-off are re-specified. A 3.7V lithium ion battery is charged up to 4.2V, while this cell stops at 3.65V, so the charger has to change even if the can fits the holder. Send the lamp's charger output, its low-voltage warning point and the holder drawing, and we will tell you which parts of the design have to move.

What charger should I pair with the cell?

A CC/CV charger made for lithium cells, with the constant-voltage stage set at 3.65V and the current set at or below the 1C continuous limit. The 0.2C standard rate is the gentle option and the one the 1500mAh rating is based on. Constant-voltage bench supplies and lead-acid chargers are a poor match, because neither stops at the right point.

Does the cell have built-in protection?

This is a bare 18650 cell, so over-charge and over-discharge protection sit in the charger and in the device's own cut-off at 2.5V. If your lamp has no low-voltage protection, tell us when you enquire — a protection circuit in the assembly is usually the answer, and it affects how much room the finished part needs.

How long will the cell last in service?

The rating is ≥2000 cycles down to 80% of nominal capacity, and Topwell quotes an 8-10 year service life for this cell in lamp duty — a figure that assumes shallow daily cycles rather than a full discharge every shift. Depth of discharge, charge rate and how hot the enclosure runs are the three things that move that number most.

Is the same cell available in other sizes if I need more runtime?

The family goes beyond 18650: it includes a 3.2V 2200mAh 22650 cell and 3.2V 26650 cells, among them a low-temperature version rated for cold work and a wide-temperature version. If your design needs more runtime than a single 18650 can give, tell us the cavity and the target runtime and we will point to the format that fits.

Brand Introduction

Yichun Topwell Power Co., Ltd (Trademark:TWE) established in 2002, is a high-tech enterprise focusing on the R&D, production and sales of lithium polymer batteries, lithium ion batteries, lithium iron phosphate batteries, and lithium thionyl chloride batteries. Products are widely used in consumer electronics, Internet of Things, smart home, medical, vehicle, home and outdoor energy storage, and have obtained CE, RoHS, Reach, UN38.3, IEC62133, CB, UL, MSDS certifications, etc.

 

Topwell moves on by providing reliable, efficient and intelligent battery solutions to meet different energy needs. We have efficient engineering, production and quality management teams. From raw material procurement, to production, testing, sales and after-sales service, all steps have been controlled by a strict quality management system. Our factory has passed ISO9001, IS014001, BISI certification, SGS, Intertek audit. With the advantages in price, quality and service, we have established long-term and stable cooperative relationships with many well-known brands. Topwell always attached the great importance to the long term cooperation with customers. No matter the order is big or small, we do our best to support you the highest quality with favorable price. We believe that Topwell Power can be your best battery supplier!

Review
Review

ver_code
1/3
X
Send your message to us
ver_code